How to deal with leaking urinals

How to deal with leaking urinals

Leaking urinals are one of the common plumbing problems in homes and public places. They not only waste water resources, but may also cause slippery floors, breed bacteria and other health hazards. This article will provide you with detailed solutions based on hot discussions and expert advice from across the Internet in the past 10 days.

1. Analysis of common causes of water leakage

2. DIY processing steps

1.Locate leaks: Use a dry paper towel to wipe each connection part in sequence and observe the first wetted part.

2.Basic tool preparation:

3.Handle on a case-by-case basis:

• The interface is leaking: turn off the water source, disassemble it, wrap 3-5 turns of raw material tape around it and reinstall it.

• Water leakage from the drain outlet: Replace the sealing flange (EPDM material is recommended)

• Cracks in the body: Temporary repairs can be made with waterproof glue. It is recommended to contact us for replacement within 48 hours.

3. Professional maintenance suggestions

4. Preventive measures

1.Regular inspection: It is recommended to check the seal status every quarter

2.Correct use: Avoid throwing solid objects into the urinal

3.water quality management: A water softener should be installed in areas with hard water to prevent scale accumulation.

5. Latest technology trends

According to recent industry reports:

6. Precautions

• Always close the main water valve before servicing

• When tightening ceramic parts, the torque should not exceed 5N·m

• If the water leakage is accompanied by a peculiar smell, it may be a problem with the sewer pipes and needs to be dealt with separately.

Through the above systematic solutions, most urinal leaking problems can be effectively dealt with. If you encounter complicated situations, it is recommended to contact a certified plumber to ensure safety and quality of repairs.